PLAXIS 3D 2017 Tutorial Manual 9. TUTORIAL MANUAL Figure 1.4 Model tabsheet of the Project properties window Definition of soil stratigraphy When you click the OK button the Project properties window will close and the Soil mode view will be shown. PLAXIS 3D 2018 - Tutorial Lesson 01.pdf; PLAXIS 3D 2018 - Tutorial Lesson 01A.p3dlog command log file PLAXIS 3D 2018 - Tutorial Lesson 01B.p3dlog command log file PLAXIS 3D 2018 - Tutorial Lesson 01C.p3dlog command log file PLAXIS 3D 2017 - Tutorial Lesson 01.pdf.
In recent years, soil models have significantly advanced from the basic elastic perfectly plastic Mohr Coulomb soil models. The Mohr-Coulomb soil model was limited in that the stress-dependency of soil stiffness was not taken into account in addition to the yield cap being fixed in principal state.
Now we have soil models that can model soil stiffness degradation with stress in addition to having a yield surface that expands or contracts due to plastic straining.
For strain-hardening soil models (such as the Hardening Soil model in PLAXIS), the yield surface expands to accommodate plastic straining while strain-softening soil models will have a contraction of the yield surface.
Plaxis 3d Manual Pdf
At typical working loads, whether a user has adopted a strain-hardening or strain-softening soil model is often irrelevant since the soil has not reached the yield surface. For cases such as cavity expansion, however, the choice of the soil model has a significant impact on the resulting stresses and displacements since soil failure will have occurred. For clayey soils, a strain-hardening soil model will show a permanent increase in mean effective stress in the soil adjacent to the expanded cylindrical (or spherical) cavity. A strain-softening soil model, however, will show an increase in mean effective stress up to soil yielding and then exhibit a reduction in mean effective stress. After cavity expansion, a strain softening soil model can show a reduction or an increase in mean effective stress in the soil adjacent to the cavity.
Plaxis 3d 2017 Tutorial Manual Instructions
The most advanced soil models at present (e.g. the SCLAY-1S soil model) have improved on this further by taking into account the destructuration of clays due to large strains. These models consider the breakdown of inter-particle bonds due to large strains and the destructuration of the clay structure.